Aircooled.Net, Inc. - Online Autoparts Catalog

carburetor kits & parts (jets, etc.)

view or modify my parts order

Dual Weber ICT Carb Kit			Part #: FSK0001
Price: $ see product details for pricing
Excellent street carbs for smaller engines, or those on a budget.

Centermount Progressive 2bbl Weber Carb Kit, DFEV Weber			Part #: FSK0002
Price: $ 429.95
TIME SPENT ON JETTING is required if you expect these to perform. These come close, but be prepared for a little work to make em' perfect! Read our jetting article. We only use the DELUXE heated intake, for ice free performance, and smooth driving. We do NOT sell these for T-4 engines since there is no source of intake heating and the carbs and intakes on these engines ice up BAD.

Weber Idle Jets			Part #: FSK0003
Price: $ 8.00
Read our jetting article, then order what you need. Choose carb type and size! Jets are sold per EACH. You need 2 idle jets per carb for DCNF, Progressives, IDAs, and IDFs, and 1 idle jet per carb for ICTs.

Weber IDF Pump Squirter			Part #: FSK0004
Price: $ see product details for pricing
50 is "normal" for duals, 65 for centermounts. Choose size. Weber does MAKE squirters other than a "50" jet, so we drill them to sizes larger than 50 if that's the size you choose (it will be marked "50", so don't freak out when it says 50). Price is for one jet, WHICH DOES ONE BARREL (you need 2 for one carb!)

Weber Main Jets			Part #: FSK0005
Price: $ 8.00
Read our jetting article, then order what you need. Choose carb type and size! IDAs not available in quarter sizes. Progressives have quarter sizes available up to 137.5, but IDFs are HALF SIZES ONLY (eg; 125, 130, 135).

Weber Air Jets			Part #: FSK0006
Price: $ 8.00
Good starting point is Main Jet size + 60. Progressives should start with a 160 and 165, or (2) 180s. Jets are sold per EACH. You need 2 air jets per carb for DCNF, Progressives, IDAs, and IDFs, and 1 air jet per carb for ICTs.

Weber IDF, IDA, and ICT Emulsion Tubes			Part #: FSK0007
Price: $ 25.95
These are sold EACH, you need 2 per carb. For dual carb applications of 1bbl per cylinder, we recommend the F11, F15, or F2 tubes.

Venturis IDF Weber Carburetors			Part #: FSK0008
Price: $ 15.00
Choose Application and Size: If you buy these venturis from us, you can EXCHANGE them (no charge) anytime down the road if you change your engine, provided they are in re-sellable shape (you didn't mangle them up during installation or removal).

Venturis for 48 IDA Weber Carburetors			Part #: FSK0009
Price: $ 29.95
Choose Size

Weber IDA Pump Jet			Part #: FSK0010
Price: $ 13.00
These are the push in jets for IDAs. These are ONLY available in a 50 size, anything larger than this is a 50 drilled to size.

Weber, Kadron, and Solex PDSIT Carburetor Rebuild Kits			Part #: FSK0012
Price: $ see product details for pricing
When carbs get old the gaskets leak, as do o-rings and seals. This leakage will give erratic operation, and can result in fuel leaks outside the carburetor (look for gas staining on the carb body). Rebuild kits give you the parts you need to get the leakage stopped! Carburetor rebuilding is often needed if the car has been sitting for a long time, the gasoline turns to varnish and can clog sensitive circuits inside the carburetor.

Electric Choke Heating Element			Part #: FSK0013
Price: $ see product details for pricing
Choose carb

Weber and Dellorto Carb Base Gaskets			Part #: FSK0014
Price: $ see product details for pricing

28, 30, and 34mm Solex Carburetor Rebuild Kit			Part #: FSK0015
Price: $ see product details for pricing
This kit includes all the gaskets needed to rebuild the 30-1, 30-2, 30-3, and 34-3 carbs, as well as the 30/31 Bocars. They also include a new needle and seat.

Weber and Dellorto Velocity Stack Covers			Part #: FSK0016
Price: $ 19.95
Covers to keep morons from pitching pennies/gravel/sand/BBs into your carbs and engine when you don't have air cleaners. Keeps out dirt, sand, and dust too.Perfect for trailered cars. One part does both carbs (2bbls), and it includes two covers to do a pair of carbs.

Weber, Dellorto, & Kadron Air Filter Assemblies			Part #: FSK0017
Price: $ see product details for pricing
Fantastic air filters. These come with everything needed for installation (top, bottom, etc). Choose Carburetor model.

Velocity Stacks, Weber and Dellorto Carbs			Part #: FSK0018
Price: $ see product details for pricing
Velocity stacks keep the fuel in the carb, and prevent "stand off" (where the fuel "fog" sits above the carb throat). Choose carb size and model.

Weber IDF Centermount Carburetor Kit			Part #: FSK0019
Price: $ 529.95
Perfect for off road engines! Choose size carb (recommmend the 40 for 1900cc and smaller engines, and the 44 for larger ones.

Dual Weber IDF (2bbl) Carburetor Kit			Part #: FSK0020
Price: $ see product details for pricing
The perfect street carbs! Choose your application below. We CUSTOM JET these to our specs, they are way off when new from Weber for what the VW/Porsche needs! Come with linkage, manifolds, and air cleaners. NOT cheap linkage like many "other" kits. These kits do NOT come with decent fuel hose, you need to purchase that separately; we recommend 7mm braided hose.

IDF/DCOE Jet Holders			Part #: FSK0021
Price: $ 8.00
These hold your air jets and slip in above your emulsion tubes.

Weber IDF Floats (new)			Part #: FSK0022
Price: $ 29.95
Leaky floats cause fuel control problems. These aren't cheap, but may solve this problem.

Weber IDF Return Spring			Part #: FSK0023
Price: $ 4.00
This is the little return spring on the throttle shafts.

Air Bypass Screw, Weber Carburetors			Part #: FSK0026
Price: $ 4.00
This is the little screw above the idle mixture screw, that also has a small locknut on it! Used to balance airflow thru barrels on carburetor at idle and low end. Choose Carb Model.

Air Bypass LOCKNUT for Air Bypass Screw			Part #: FSK0027
Price: $ see product details for pricing
This is the little locknut that keeps the bypass screw tight! Choose Carb Model.

Deluxe Centermount Intake Manifold for Weber Progressive, Weber IDF, and Dellorto DRLA			Part #: FSK0028
Price: $ 179.00
We now offer the SAME deluxe intake we offer in our kits! Red line shows exhaust flow (and why this manifold heat is so good!). These deluxe kits can transform an undrivable beast into a smooth runner, just with the intake pre-heat!

Weber Throttle Shaft			Part #: FSK0029
Price: $ see product details for pricing
Sometimes Gorillas bend these things, so we have them available (or if yours got FUBARed somehow). Available for IDF, DCNF, & DCOE

Venturi Boring (Labor)			Part #: FSK0030
Price: $ 15.00
Send us your carb venturis (weber, dellorto, etc) and specify the size you want them bored to. We'll do the rest! Price per venturi (not a set!).

Carb Top Gasket (Air Cleaner Gasket)			Part #: FSK0031
Price: $ see product details for pricing
This is the gasket that fits between the carb and the air cleaner base. This gasket is required if you don't want UNFILTERED air bypassing your air filter.

Weber 48 IDA Air Horn Screen (Filter)			Part #: FSK0034
Price: $ 22.95
This slick item fits onto your velocity stack, and keeps dirt and gravel (and other crap) from going into your engine (breaking stuff). One "kit" does ONE carb (both barrels).

Weber Carb Top Gasket			Part #: FSK0035
Price: $ see product details for pricing
This fits between the carb top and carb body. Routinely gets squished and won't seal after the carb top has been removed and reinstalled a lot. Choose carb model. Price for EACH gasket.

Weber Idle Mixture Screw			Part #: FSK0037
Price: $ see product details for pricing
Choose Carb Model

NEW Weber Carburetor (carb ONLY)			Part #: FSK0038
Price: $ see product details for pricing
For those of you that need just a carb (or two) for whatever reason (fire, damage, already have linkage/intakes). We don't list the ICT and DFAV/DFEV because the price is outrageous (get the kit).

Weber IDF & IDA Auxiliary Venturi			Part #: FSK0040
Price: $ see product details for pricing
This is the small opening in the top of the carb that delivers the vacuum signal to the main and air jets for the carb to work. This is the standard size, 4.5mm. Choose carb model.

IDF and IDA Pump Bypass			Part #: FSK0041
Price: $ 14.95
When the accellerator pump diaphragm pushes fuel, some goes to the squirter, and some goes BACK to the float bowl thru the pump bypass. IDFs come with a 55, and if you drop this to a zero, ALL the fuel is squirted towards the cylinder (not back into the float bowl), which eliminates hesitation, especially with today's oxygenated fuels! You need 1 bypass per carb. IDAs come with a 0 Bypass.

Solex, Brosol, Bocar and Kadron Main Jets			Part #: FSK0043
Price: $ 7.00
Due to oxygenated fuel, bumping your main jet size up a little will make your car run better AND cooler. We recommend 125-130 for the 34-3, and Kadron applications, even though Kadrons have 135s when new. You need 1 main jet per carburetor.

Solex, Brosol, Bocar, Kadron, and Pierburg Idle Jets			Part #: FSK0044
Price: $ 7.00
We carry a bunch of sizes, but trust us you need 55s if you live near sea level, and need 50s if you live at 4k' or higher. Kadrons often run much better with the 50 instead of the "stock" 55. It's critically important to get the fuel pressure to 1.5-2psi for Kadrons and stock carburetors before you start wasting time with jetting.

Weber Needle and Seat			Part #: FSK0045
Price: $ see product details for pricing
This is the valve that lets the gas in, and the float closes it to stop the flow of fuel into the carb. If you have a LOT of HP, the stock unit is likely too small (it's a 1.75), and you may need a 2.00 or 2.5, HUGE engines with IDAs use a 3.00.

Weber, Dellorto, and Solex Foam Air Filters			Part #: FSK0046
Price: $ 30.00
These Uni-Filters are foam filters that you must oil. They clamp onto the Weber velocity stacks, and will not come off! They are excellent quality, and have a large spring inside the filter to keep the filter assembly from getting "sucked in" under WOT conditions. Price is for 1 pair of filters to do one carburetor, and clamp onto the stock velocity stack!

Weber Idle Jet HOLDER			Part #: FSK0048
Price: $ see product details for pricing
This obviously holds the idle jet and allows it to screw into the carb body. These are sold PER EACH (each carb needs 2).

NEW Weber 48 IDA			Part #: FSK0049
Price: $ 575.00
Yes, BRAND NEW Weber IDAs, complete with velocity stacks and jet screens! These are the real deal, and not 48 IDFs that are mistaken for "The Big Ones" that are present on most serious hot street and race cars. These are the 48 IDA 4R series of carb, and come with 37mm venturis, and have 2 progression holes. Don't miss out on some genuine NEW 48 IDAs, at a reasonable price to boot! These are IN STOCK and ready to ship. Price per EACH CARB.

Carb Return Spring			Part #: FSK0050
Price: $ 2.00
Fit's stock carb on 66' and newer type 1s, and 63' and newer type 2s

New Stock Carburetor			Part #: FSK0051
Price: $ see product details for pricing
"Rebuilt" carbs are often beyond rebuilding due to throttle bore wear. These are NEW.

IDF Choke Blockoff Plate			Part #: FSK0052
Price: $ 7.95
Some IDFs have a choke mechanism on the accelerator pump diaphragm side of the carb (towards the top). This device is not used on our engines, and in fact it can interfere with the fan shroud in some cases. This is a blockoff plate to remove that for more clearance between the carb and shroud. Price for 1 kit to do 1 carb.

Progressive Air Filter Adapter			Part #: FSK0054
Price: $ 29.95
This cast aluminum adapter converts your progressive carb's wierd air filter mounting arrangement to a 2 5/8" round opening, so you can use a conventional filter (including the stock one, if you change the size).

Kadron and Solex Carburetor Float			Part #: FSK0055
Price: $ 19.95
These must be air-tight, if the float leaks it must be replaced! Sold per each.

Kadron & Stock Solex Needle & Seat			Part #: FSK0056
Price: $ 4.95
This is the valve that screws into your carb top. It lets the fuel in, and is SUPPOSED to stop it too, but if they leak the carb floods! Sold per each.

Universal Crankcase Ventilation Fitting			Part #: FSK0057
Price: $ 4.95
This nylon fitting is used to route your crankcase breather hose to the air filter housings. You do this if you are not running a breather box. Price is for one fitting.

Weber IDA Jet Stack Screens			Part #: FSK0058
Price: $ 23.95
These are the brass screens that cover the jet stack, keeping leaves and other crap out of the jets. Sold per EACH.

Foam Filter Covers, 4 1/2 x 7 x 3 1/4"			Part #: FSK0059
Price: $ 9.95
These foam pre-filters keep the main filter elements cleanER then running without them. They effectively protect your existing filter elements against the "Big Chunks". Choose Color. Sold per EACH to do one carb.

Dual Solex 35 PDSIT Carb Kit, Dual Port Upright Engines			Part #: FSK0060
Price: $ 499.95
This kit fits dual port engines in Beetles, Ghias, Things, and Busses. This kit is SIMILAR to the Kadron carb kit, but with a 30 year newer carb design! 35mm Throttle Body is just right for stock and stocker plus engines from 1300-1900cc. The non-choke version has been discontinued, so electric chokes are now standard equipment. These carbs are currently ONLY available for Dual Port upright engines.

Solex and Kadron Air Jets			Part #: FSK0061
Price: $ 8.00
Here are genuine Solex and Kadron air jets for further tuning your carb(s). These fit Kadrons and the Solex PDSITs, they DO NOT FIT THE ORIGINAL 30 and 34 series carbs!

30mm Venturis for 35 PDSIT Solex Carburetor			Part #: FSK0062
Price: $ 20.00
These are sold PER EACH (one needed per carb). The stock size is 27mm, which is fine for a stock engine, but too small for mild performance engines. Upgrading the venturi size really wakes up these carburetors, especially on larger engines!!

35 PDSIT Throttle Plate			Part #: FSK0063
Price: $ 45.00
This is a new throttle plate for the electric choke 35mm PDSIT. Use this if you broke off the idle mixture screw, or the throttle shaft bushings are worn and it's sucking air.

There are 53 products in this category

Continue Searching for Aircooled VW Autoparts