| IRS Diagonal Arm Brackets |
Part
#: SSH0001
|
|
||
| Price: $ 49.95 | ||||
| These slick items allow you to convert your Swing Axle pan over to IRS rear suspension! | ||||
| KYB GR-2 Gas shocks (low pressure) |
Part
#: SSH0008
|
|
||
| Price: $ see product details for pricing | ||||
| Our recommended stocks for street cars. Excellent performace, and won't rattle your fillings loose. These are sold PER SHOCK. | ||||
| Stock FRONT Shock absorber (Brazilian), oil filled |
Part
#: SSH0009
|
|
||
| Price: $ see product details for pricing | ||||
| Brazilian shocks (IMO) work as well as German. Sometimes you can save $ with no loss in performance! | ||||
| Rear GAS shocks and Gas Charged Strut Inserts |
Part
#: SSH0013
|
|
||
| Price: $ see product details for pricing | ||||
| High Pressure Gas Shocks are non-forgiving. If you don't see it listed, it's because we don't recommend it for that application! (there is a reason for this). | ||||
| Strut Inserts |
Part
#: SSH0014
|
|
||
| Price: $ see product details for pricing | ||||
| Stock strut inserts (shocks). These fit inside the strut housing, and are your shock absorber in the front. Bounce on the front bumper, it should not "bounce" but simply return to ride height. These strut inserts are oil filled (NOT GAS SHOCKS). | ||||
| Spacer Sleeve (upper strut mount bushing) 73- supers |
Part
#: SSH0017
|
|
||
| Price: $ 1.95 | ||||
| AKA: strut mount bushing | ||||
| Shocks for Lowered Beetles |
Part
#: SSH0018
|
|
||
| Price: $ 59.95 | ||||
| Use these if you have beam adjusters installed. Much shorter than stock, so they won't bottom out. Price is for a PAIR! | ||||
| Rear Suspension Snubbers, Rubber & Urethane |
Part
#: SSH0019
|
|
||
| Price: $ see product details for pricing | ||||
| This is the suspension stop that prevents your wheel from travelling too high in the wheelwell, which would cause a BANG! Choose application. Price is for 2 stops to do one car! | ||||
| Mounting Kit for 66 & Newer STOCK STYLE Front Shocks |
Part
#: SSH0020
|
|
||
| Price: $ 22.95 | ||||
| Original Style Stock shocks are sold without the mounting kit; THIS is the mounting kit. This kit mounts ONE shock. | ||||
| Gas Charged Hood Strut Kit |
Part
#: SSH0022
|
|
||
| Price: $ 30.00 | ||||
| FINALLY, a cure for those beastly stock hood springs (SCREEETCH!!!), these are QUIET! Besides looking great, they are smooth as silk! Fit all beetles, and 71-72' Superbeetle. Do NOT fit 73 and newer Supers! Kit includes 2 struts. | ||||
| IRS Diagonal Arm Bolt and Washer Kit |
Part
#: SSH0023
|
|
||
| Price: $ 18.95 | ||||
| WOWZERS! We finally found a source for this impossible to find item, and it's improved to boot! These often fall out, or are severely rusted because of their exposure to road stuff (salt, water, etc). Price is for 1 bolt and 2 washers, which does one SIDE of the car (one wheel). | ||||
| Upper Strut Mount With Bearing, 71-73 Superbeetle |
Part
#: SSH0025
|
|
||
| Price: $ 59.95 | ||||
| This is the 3 bolt piece that contains the spring on the top. It has a bearing in it to allow the strut and wheel to swivel as you steer the car. If this bearing goes bad, the top of the strut assembly can wiggle and contribute to the Superbeetle-Shimmy. Price is for 1 mount to do one SIDE. | ||||