These carb kits are complete from intakes to air filters. The kit is very well thought out, even the idle mixture screws are accessible!We supply this kit with the same DELUXE centerpull linkage that we recommend for Kadron carbs! These carbs have the proper vacuum port for SVDA and Mallory Vacuum Advance Distributors for cooler running, and 3-4mpg improvement over non-vac distributors; Read the SVDA product description for details.
These carbs are a very good deal, especially with the price of Webers going through the roof!
We have jets and other related parts here if you need them too, and have more experience jetting these carburetors PROPERLY then anyone we know of. They come with stupid jetting from the factory, but as you would expect from Aircooled.Net WE FIX THAT PROBLEM if you choose the Setup & Jet option.
If you have a bus with power brakes, you'll have to T the vacuum into the balance tube connected to the intakes, a simple task.
These carbs operate best with 1.5-2psi fuel pressure, so check yours to find out if you need to drop the pressure (or change fuel pumps) before ordering.
It's important to note that this kit does NOT come ready for the crankcase breather. If you install these carb, you must figure out how to vent your engine's crankcase, most folks simply use a breather box for this purpose.
By choosing the Setup and Jet option, we modiy these kits so they are a no-hassle install for YOU, the kits do NOT fit the engines as they arrive to us! :-/ Read more at http://waitresses.servebeer.com:81/vwpage/35pdsit/35pdsit.htm
These carburetors do NOT have provision for using the stock oil breather, so we recommend that you purchase a breather box kit to ventilate the crankcase, since this system will be removed when you remove the stock air filter assembly.
