2275cc “Mild” VW Engine Combo with CB Panchito Heads ~ Requires 1 5/8″ Exhaust and 44mm Dual Carburetors

This parts list is part of our series of our most popular engine combos designed to make shopping shopping for compatible engine components easier for you. Click HERE if you want to see a list of all our engine combos to choose from!

This list will give you a long block that is proven and tested to deliver 150hp with ease! It will need dual Weber 44 IDFs, or dual Dellorto 40 or 45 DRLAs. This version of 2275 is NOT a “full tilt street build”. This is one you can drive every day without issue! This “milder” 2275 will result in both a durable and easier to drive engine which will last a long time. This engine will also work really well in a bus! This engine requires a 1 1/2″ or 1 5/8″ exhaust. You can de-tune it a bit with  L3 Cylinder Heads, 1 3/8″ exhaust, a smaller cam, and either dual 40 IDF carburetors or Weber Progressive DFAV/DFEV carburetors.

During the mock up stage, you’ll have to order cylinder base shims to get the engine’s deck height between .040-.060″; we target .050″, so if you are off +-.010″ it’s not a big deal.

Use this component list as a base; simply change the carbs, heads, and cam, for a wilder or milder engine as you see fit. Feel free to consult us for any recommended changes for your needs! An example is 92mm Thick Wall P&Cs for busses or Type 3s, with no other changes.

• Curil T sealant, used for case halfs, and all applications OTHER than cylinder bases.
• Dirko RTV, or Permatex RTV for the case to cylinder interface
• Magnesium Super Case, bored for 94s, stroke relieved, and drilled/tapped for full flow oiling
• 5.400″ H-beam connecting rods OR 5.400″ SCAT H-beam connecting rods OR 5.4″ SCAT I-beam connecting rods, OR 5.400″ Chromoly I-beam connecting rods
• Full flow filter kit
• Engine case hardware kit
• Engle W120 Camshaft
• Engle lifters
• Engine gasket set with flywheel seal
• Main bearings for the new crank and new case (Standard)
• Rod bearings (Standard)
• Double thrust cam bearings
• (5) Main bearing dowel pins
• Straight cut cam gears
• (8) Stainless steel push rod tubes
• Panchitos Cylinder Heads
• 1.5qt Thin Line Deep Sump
• Manton chromoly push rods OR ACN Heavy Duty Aluminum Push Rods
• 94x82mm piston and cylinder kit
• (2) Air deflector tins
• Cam plug
• 4340 chromoly crankshaft w/VW journals
• Crankshaft gears and spacers
• Chrome vanadium lightened flywheel
• Chromoly gland nut
• Chromoly head stud kit
• 1.1:1 Super Stock rocker arms OR 1.25 Super Stock rocker arms OR SCAT 1.25 rocker arms
• Flywheel shim kit
• Engine case hardware kit
• Dual 44 Weber IDF carb kit

<a href=”http://www.aircooled.net/2275cc-engine-combo-parts-list/ “>2275cc “Mild” Engine Combo, by Aircooled.Net VW Parts</a>